英国与食品接触材料安全法规 UK SI 898:2005 | 陶瓷食品接触材料标准 BS 6748
常见材料UK SI 898:2005测试内容:
Plastic material 塑料
Overall migration in deionized water 全面迁移之去离子水浸取法Overall migration in 3% acetic acid 全面迁移之3%醋酸浸取法
Overall migration in 10% ethanol 全面迁移之10%酒精浸取法
Overall migration in rectified olive oil 全面迁移之橄榄油浸取法
Full test of overall migration test 全面迁移全套测试
Ceramic and Glass 陶瓷玻璃
Contact with food part - Leachable lead and cadmium 与食品接触部分铅镉溶出量测试Silicone Rubber 硅橡胶 - AP (2004)5
Overall migration in deionized water 全面迁移之去离子水浸取法Overall migration in 3% acetic acid 全面迁移之3%醋酸浸取法
Overall migration in 10% ethanol 全面迁移之10%酒精浸取法
Overall migration in isooctane as substitute of rectified olive oil全面迁移之橄榄油替代物异辛烷浸取法
Overall migration in 95% ethanol as substitute of rectified olive oil全面迁移之橄榄油替代物95%酒精浸取法
Full test of overall migration test 全面迁移全套测试
Melamine 三聚氰氨树脂(美耐皿)制品的要求
Overall migration in deionized water 全面迁移之去离子水浸取法Overall migration in 3% acetic acid 全面迁移之3%醋酸浸取法
Overall migration in 10% ethanol 全面迁移之10%酒精浸取法
Overall migration in isooctane as substitute of rectified olive oil全面迁移之橄榄油替代物异辛烷浸取法
Overall migration in 95% ethanol as substitute of rectified olive oil全面迁移之橄榄油替代物95%酒精浸取法
Full test of overall migration test 全面迁移全套测试
Extractable formaldehyde 甲醛溶出量测试
Organic coating 有机涂层 - AP(2004)1
Overall migration in deionized water 全面迁移之去离子水浸取法Overall migration in 3% acetic acid 全面迁移之3%醋酸浸取法
Overall migration in 10% ethanol 全面迁移之10%酒精浸取法
Overall migration in isooctane as substitute of rectified olive oil全面迁移之橄榄油替代物异辛烷浸取法
Overall migration in 95% ethanol as substitute of rectified olive oil全面迁移之橄榄油替代物95%酒精浸取法
Full test of overall migration test 全面迁移全套测试
Rubber 橡胶 - AP (2004) 4 & 93/11/EEC
Overall migration in deionized water 全面迁移之去离子水浸取法Overall migration in 3% acetic acid 全面迁移之3%醋酸浸取法
Overall migration in 10% ethanol 全面迁移之10%酒精浸取法
Overall migration in isooctane as substitute of rectified olive oil全面迁移之橄榄油替代物异辛烷浸取法
Overall migration in 95% ethanol as substitute of rectified olive oil全面迁移之橄榄油替代物95%酒精浸取法
Full test of overall migration test 全面迁移全套测试
Nitrosamine content 亚硝胺含量 (Need subcontract to HK)
Migration of aromatic amine 芳香胺迁移
Paper纸张 - AP (2002)1
Pentachlorophenol (PCP) 五氯苯酚Preserving effect 防腐效力
Extractable Heavy metals (Pb, Cd, Hg, CrVI)* 重金属释出量(铅,镉,汞,六价铬)*
Fluorescent matter 荧光物质(四种模拟物状态)
* -not acceptable for the product in contact with dry food
*-不适用于纸张与干性食品接触情况
Wood木材
Pentachlorophenol (PCP) 五氯苯酚Extractable Formaldehyde 甲醛释出量
英国食品接触材料检测 UK SI 898的具体测试项目和测试方法如下:
塑料通用要求; |
Order of 2/01/2003 |
A.总迁移--10%乙醇 |
10mg/dm2 |
EN1186-1; |
1.依据客户要求A可以改为水,D2可以改为95%乙醇或异辛烷; |
<3mg/dm2 |
B.总迁移--3 % 醋酸 |
EN1186-1; |
<3mg/dm2 |
||||
C.总迁移--20%乙醇 |
EN1186-1; |
<3mg/dm2 |
||||
D1.总迁移--50%乙醇 |
EN1186-1; |
<3mg/dm2 |
||||
D2.总迁移--植物油 |
EN1186-1; |
<3mg/dm2 |
||||
重金属迁移 Specific migration of metals |
限值见备注7 |
BS EN13130 -1:2004 |
见备注1 |
ND,MDL |
||
初级芳香胺(PAA)迁移 Specific migration of primary aromatic amines(选做) |
0.01 mg/kg |
BS EN13130 -1:2004 |
见备注1 |
ND, MDL=0.01 |
||
默认项目:总迁移(10%乙醇,3%醋酸,植物油)+重金属迁移 |
||||||
PC聚碳酸酯 |
Order of 2/01/2003 |
塑料通用要求 |
|
|
|
|
特殊迁移-双酚A迁移 |
0.6mg/kg |
BS EN13130 -13:2004 |
见备注1 |
ND, MDL=0.1 |
||
ABS丙烯腈- 苯乙烯- 丁二烯共聚物 |
Order of 2/01/2003 |
塑料通用要求 |
|
|
|
|
丁二烯迁移量 |
不得检出 |
BS EN13130 -15:2004 |
见备注1 |
ND,MDL= 0.1mg/kg |
||
丙烯腈迁移量 |
不得检出 |
BS EN13130 -3:2004 |
见备注1 |
ND,MDL= 0.1mg/kg |
||
聚酰胺(尼龙PA) |
Order of 2/01/2003 |
塑料通用要求 |
|
|
|
|
(EU) |
初级芳香胺(PAA) |
0.01 mg/kg |
BS EN13130 -1:2004 |
见备注1 |
ND, MDL=0.01 |
|
(EU) |
甲醛迁移量 |
15mg/kg |
BS EN13130 -23:2004 |
见备注1; |
ND, MDL=1 |
|
|
特殊迁移-己内酰胺迁移(选做) |
15 mg/kg |
BS EN13130 -16:2004 |
见备注1 |
ND, MDL=5 |
|
三聚氰胺塑料 |
(EU) |
塑料通用要求 |
|
|
|
|
(EU) |
初级芳香胺(PAA) |
0.01 mg/kg |
BS EN13130 -1:2004 |
见备注1 |
ND, MDL=0.01 |
|
(EU) |
三聚氰胺单体迁移量 |
2.5mg/kg |
BS EN13130 -1:2004 |
见备注1 |
ND, MDL=1 |
|
甲醛迁移量 |
15mg/kg |
BS EN13130 -23:2004 |
见备注1; |
ND, MDL=1 |
||
聚氯乙烯(PVC) |
78/142/EEC |
塑料通用要求 |
|
|
|
|
氯乙烯单体含量content of vinyl chloride monomer(VCM) |
1 mg/kg |
|
80/766/EEC |
ND, MDL=0.5 |
||
氯乙烯单体迁移量 Specific migration of vinyl chloride monomer |
不得检出 |
BS EN13130 -1:2004 |
81/432/EEC |
ND, MDL=0.01 |
||
涂层 |
AP(2004)1 |
同塑料通用要求 |
|
|
|
|
硅胶 |
Order of 09/11/1994 |
A.总迁移--10%乙醇 |
10mg/dm2 |
EN1186-1; |
1.依据客户要求A可以改为水,D2可以改为95%乙醇或异辛烷; |
<3mg/dm2 |
B.总迁移--3 % 醋酸 |
EN1186-1; |
<3mg/dm2 |
||||
C.总迁移--20%乙醇 |
EN1186-1; |
<3mg/dm2 |
||||
D1.总迁移--50%乙醇 |
EN1186-1; |
<3mg/dm2 |
||||
D2.总迁移--植物油 |
EN1186-1; |
<3mg/dm2 |
||||
挥发性有机物(VOM) |
0.005 |
order of 25/11/1992, annex III, section2 |
200°C,4H |
<0.1% |
||
过氧化值Peroxides |
Absent |
according to the French pharmacopoeia, Xth edition. |
Absent |
|||
有机锡迁移量Migration of organotin(As tin)(选做) |
0.1mg/kg |
|
见备注1 |
|
||
橡胶 |
Order of 09/11/1994 |
A.总迁移--10%乙醇 |
10mg/dm2 |
EN1186-1; |
1.依据客户要求A可以改为水,D2可以改为95%乙醇或异辛烷; |
<3mg/dm2 |
B.总迁移--3 % 醋酸 |
EN1186-1; |
<3mg/dm2 |
||||
C.总迁移--20%乙醇 |
EN1186-1; |
<3mg/dm2 |
||||
D1.总迁移--50%乙醇 |
EN1186-1; |
<3mg/dm2 |
||||
D2.总迁移--植物油 |
EN1186-1; |
<3mg/dm2 |
||||
挥发性有机物(VOM) |
0.005 |
order of 25/11/1992, annex III, section2 |
105°C,4H |
<0.1% |
||
过氧化值Peroxides
value |
Absent |
according to the French pharmacopoeia, Xth edition. |
Absent |
|||
芳香胺迁移量 Migration of aromatic amines(选做) |
1mg/kg |
BS EN13130 -1:2004 |
见备注1 |
ND,MDL=0.1 |
||
甲醛迁移量Migration of formaldehyde(选做) |
3mg/kg |
BS EN13130 -23:2004 |
见备注1 |
ND,MDL=1 |
||
N-亚硝铵迁移Migration of N-nitrosamines |
奶嘴10ug/kg产品 |
EN
12868:1999 |
|
ND,MDL |
||
N-亚硝基化合物迁移Migration of Nnitrosatable |
奶嘴100ug/kg产品 |
|
ND,MDL |
|||
金属通用要求 |
CM/Res(2013)9与食品接触的金属和合金指南 |
23项重金属溶出-人工自来水Eau du robinet artificielle DIN 10531 |
|
|
除酸性以外物质(包括干性) |
ND,MDL |
23项重金属溶出-0.5%柠檬酸 |
|
|
接触酸性物质(PH≤4.5) |
ND,MDL |
||
7项重金属溶出 |
7项重金属溶出(老标准)Ni,Cd,Cr,Pb,Co,Cu,Sb |
|
|
见备注1; |
ND,MDL |
|
不锈钢-1 |
DM-4B-COM-001-V01 |
金属通用要求 |
||||
成分分析(碳,硅,锰,磷,硫,镍) |
不同类型要求不一致(DM/4B/COM/001附件4) |
EPA3050B |
|
ND,MDL=2 |
||
铬Cr含量 |
Cr≥13% |
EPA3050B |
|
|
||
钽tantalum(Ta), |
分别<1% |
EPA3050B |
|
|
||
钼molybdenum(Mo), |
分别<4% |
EPA3050B |
|
|
||
钢铁材料(包装)-3a |
DM-4B-COM-001-V01 |
金属成分(22个元素) |
见备注3 |
EPA3050B |
|
|
不良元素铅镉砷钴(已包括在上面22个元素中) |
Pb <
0,010 % |
EPA3050B |
|
|
||
钢铁材料-带金属镀层(包装)-3b |
DM-4B-COM-001-V01 |
基材金属成分满足对应的钢铁材料(包装)的要求 |
|
EPA3050B |
|
|
锡镀层需要满足BSEN610关于99.85锡的要求,需要测试(Al, As,Bi,Cd,Cu,Fe,Pb,Sb,Zn) |
见备注4 |
EPA3050B |
|
|
||
镀层不良元素铅,镉,砷 |
Pb <
0,010 % |
EPA3050B |
|
|
||
钢铁材料-带有机涂层(包装)-3c |
DM-4B-COM-001-V01 |
涂层见塑料要求 |
|
|
PH值<4.5的酸性条件用10%的乙醇模拟物 |
|
基材需要满足对应金属的要求(选做) |
|
|
|
|
||
不沾有机涂层六价铬迁移 |
5ug/dm2 |
|
|
|
||
钢铁材料(非包装)-4 |
DM-4B-COM-001-V01 |
金属成分(21个元素) |
见备注5 |
|
如餐具,厨具 |
|
不良元素铅,镉,砷(已包括在上面21个元素中) |
Pb<0.05%; |
|
|
|
||
钢铁和不锈钢-带金属镀层(非包装)-5a |
DM-4B-COM-001-V01 |
基材金属成分满足对应的不锈钢和钢铁材料(非包装)的要求 |
|
|
|
|
镀层不良元素铅,镉,砷、钴 |
Pb <
0,010 % |
|
|
|
||
重金属镍,铬,锌迁移(当镀层分别是镍,铬,锌时) |
Ni:0.5mg/kg; |
干性食物不需要做迁移 |
水性:去离子水 |
|
||
PH≤4.5:0.5%柠檬酸; |
|
|||||
酒类:10%或更高浓度的乙醇 |
|
|||||
脂类:油2h |
|
|||||
钢铁和不锈钢-带有机涂层(非包装)-5b |
Order of 15/11/1945 |
涂层见塑料要求 |
|
|
PH值<4.5的酸性条件用10%的乙醇模拟物 |
|
不沾有机涂层六价铬迁移 |
5ug/dm2 |
|
|
|
||
基材需要满足对应金属的要求(选做) |
|
|
|
|
||
铝及铝合金-2 |
DM-4B-COM-001-V01 |
铝材金属成分元素含量(Fe, Si, Ti, Cr, Zn, Cu, Mn, Mg, Ni, Sn, Pb, Ti, Be共13个元素) |
见备注6 |
|
|
|
铝合金金属成分元素含量(Si, Sb, Sn, Mg, Cr, Mn, Ti, Ni, Zr, Fe, Zn, Cu, Sr, As, Ta, Be, Ti, Pb共18个元素) |
见备注6 |
|
|
|
||
涂层见塑料要求 |
|
PH值<4.5的酸性条件用10%的乙醇模拟物(乙醇10 % *包装食品(饮料罐,轻罐头=) |
||||
铸铁(如铁锅) |
|
铅 |
≤0.05% |
|
|
|
带金属镀层的铸铁-5a |
DM-4B-COM-001-V01 |
基材铅 |
≤0.05% |
|
|
|
镀层不良元素铅,镉,砷 |
Pb≤0.050%; |
|
|
|
||
重金属镍,铬,迁移(当镀层分别是镍,铬时) |
Ni:0.5mg/kg; |
|
水性:去离子水 |
|
||
PH≤4.5:0.5%柠檬酸; |
|
|||||
酒类:10%或更高浓度的乙醇 |
|
|||||
脂类:油2h |
|
|||||
带有机涂层的铸铁-5b |
|
涂层见塑料要求 |
|
|
|
|
基材需要满足对应金属的要求(选做) |
|
|
|
|
||
不沾有机涂层六价铬迁移 |
5ug/dm2 |
|
|
|
||
锡及锡合金-7 |
DM-4B-COM-001-V01 |
锡含量 |
≥97% |
|
|
|
不良元素铅,镉,砷 |
Pb≤0.050%; |
|
|
|
||
锑antimony(Sb); |
Sb≤ 2.5%; |
|
|
|
||
锌及锌合金-8 |
DM-4B-COM-001-V01 |
锌含量 |
≥99.85% |
|
|
|
不良元素铅,镉,砷 |
Pb≤0.05%; |
|
|
|
||
锌迁移Specific migration of Zn |
10mg/kg食物 |
|
|
|
||
其它金属材料-9 |
|
不良元素铅,镉,砷 |
Pb≤0.050%; |
|
|
|
重金属迁移(Ni,Cr,Zn,Pb,Cd) |
Ni:0.5;
Cr:5; |
|
|
|
||
玻璃、水晶、陶瓷、搪瓷制品 |
DM-4B-COM-002-V01 |
铅 |
见备注2 |
4%醋酸22℃24h |
ND,MDL |
|
镉 |
见备注2 |
ND,MDL |
||||
六价铬(不适用于陶瓷) |
Flatware:0.005mg/dm2 |
ND,MDL |
||||
Hollowware(>3L):0.03mg/l |
|
|||||
Hollowware(<3L):0.03mg/l |
|
|||||
Lip and rim:0.015mg/unit |
|
|||||
铝(不适用与口腔直接接触) |
1mg/kg |
4%醋酸22℃24h,重复使用的制品需迁移3次,以第3次为最终结果 |
ND,MDL |
|||
钴(不适用与口腔直接接触) |
0.02mg/kg |
ND,MDL |
||||
砷(不适用与口腔直接接触) |
不得检出(检出限为0.002mg/kg) |
ND,MDL |
||||
木制品 |
AP(2004)2 |
五氯苯酚 |
残留量0.15mg/kg |
EN15320 |
|
|
甲醛迁移量 Specific migration of formaldehyde |
Limit:15mg/kg食品 |
EN13130-1 |
见备注1 |
ND, MDL=1 |
||
纸和纸板 |
CSHPF
13/10/98 |
感观测试 Organoleptic inertia |
Absence |
EN 1230-2 |
|
absent |
五氯苯酚含量Pentachlorophenol (PCP) content |
≤ 0.1 mg/kg of paper |
EN/ISO 15320 |
|
ND,MDL=0.05 |
||
甲醛迁移migration of Formaldehyde |
≤ 1 mg/dm² |
采用EN645冷水萃取或EN647热水萃取,BSEN1541-2001测定 |
ND,MDL=0.5 |
|||
可萃取重金属extractable heavy metals (Pb, Cd,Hg, CrVI) |
Pb≤3 mg/kg
paper |
采用EN645冷水萃取或EN647热水萃取,ENV 12497 (Hg) |
ND,MDL |
|||
色牢度Fastness to bleeding colorants |
5级 |
EN 646 or EN648 |
|
具体级数 |
||
热萃取物Hot extraction |
10 mg/dm² or 10 mg/g of paper |
EN 920 |
|
<3mg/dm2 |
||
多氯联苯含量Polychlorobiphenyl (PCB) content |
≤ 2 mg/kg of paper |
EN/ISO 15318 |
|
ND,MDL=1 |
||
乙二醛迁移Glyoxal extractable (选做) |
≤ 1.5 mg/dm² |
|
|
ND,MDL=0.5 |
||
抗菌成分迁移Transfer of antimicrobial constituents |
No Transfer of antimicrobial agents |
|
BS EN 1104-2005 |
没有抗菌成分迁移 |
||
1、干性食物需要测试:感官,PCP,PCB,甲醛迁移,乙二醛迁移,抗菌成分迁移; |
|
第三方精锐检测技术测试公司是ISO/IEC 17025认可实验室和CPSC认可实验室检测认证机构。提供有毒有害物质检测,受限物质RSL检测,平台入驻质检报告,招投标质检报告,安规,EMC,可靠性与失效分析,材料成分分析与鉴定等检测认证服务。
东莞市精锐检测技术服务有限公司PTS Testing Service --- 您值得信赖的第三方检测实验室合作伙伴!